Construction codes of Ontario

→ View our videos on Tiktok ↓ Code related products on Amazon

Flat Plug Power Bars with Surge Protector, Flat Extension Cord Indoor 5 Feet, TESSAN Power Strip with 4 Multiple Outlets 3 US...

$29.99

Doors to Bathrooms

Doors to Bathrooms (1) Where a barrier-free path of travel conforming to Section 3.8. is provided into a suite of residential occupancy and where a bathroom within the suite is at the level of the suite entrance door, the doorway to such bathroom and to each bedroom at the same level as such bathroom shall have, […]

Doors to Rooms Containing Water Closets

Doors to Rooms Containing Water Closets (1) A door shall be provided to each room containing a water closet within a dwelling unit. Article 9.5.9.2 Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.

Doorway Opening Sizes

Doorway Opening Sizes (1) Except as provided in Articles 9.5.11.3., 9.9.6.2. and 9.9.6.3., doorway openings within dwelling units shall be designed to accommodate at least the door sizes in Table 9.5.11.1. for swing-type doors or folding doors Article 9.5.11.1 Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.

Doorway Opening Sizes – Table

Table 9.5.11.1.Minimum Door Sizes Forming Part of Sentence 9.5.11.1.(1) Notes to Table 9.5.11.1.: (1) See Article 9.5.11.3. Table 9.5.11.1 Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only.

Ducts

(1) Ventilation ducts shall conform to the requirements of Part 6 for supply ducts, except that exhaust ducts that serve only a bathroom or water closet room may be of combustible material provided the duct is reasonably airtight and constructed of a material impervious to water. (2) Exhaust ducts shall not discharge into heated or unheated […]

Electrical Cable Method of installation (see Appendices B and G) Non-metallic-sheathed cable

Electrical Cable Method of installation (see Appendices B and G) Non-metallic-sheathed cable 1) The cable shall be run in continuous lengths between outlet boxes, junction boxes, and panel boxes as a loop system and the joints, splices, and taps shall be made in the boxes. 2) Where concealed wiring is connected to non-metallic-sheathed cable, the […]

Entrance of cables into boxes, cabinets, and fittings

Entrance of cables into boxes, cabinets, and fittings 1) Where cables pass through the walls of boxes, cabinets, or fittings, provision shall be made to a) protect the insulation on the conductors from damage;b) protect terminal connections from external strain;c) provide electrical continuity between a metal box, cabinet, or fitting and conduit, armour, or metal […]