Continuity of the Air Barrier System

Continuity of the Air Barrier System (1)  Where the air barrier system consists of an air-impermeable panel-type material, all joints shall be sealed to minimize air leakage.     (2)  Where the air barrier system consists of flexible sheet material, all joints shall be,     (a)   sealed with compatible material such as tape or flexible sealant, or     […]
Read more

Control of Water Ingress

Control of Water Ingress (1)  Except as provided in Article 9.16.3.2. or where it can be shown to be unnecessary, ingress of water underneath a floor-on-ground shall be prevented by grading or drainage. Article 9.16.3.1 Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more

Edge Support Panel-Type Subflooring

Edge Support Panel-Type Subflooring (1)  Where the edges of panel-type subflooring are required to be supported, such support shall consist of tongue-and-groove panel edges or not less than 38 mm by 38 mm blocking securely nailed between framing members. Article 9.23.14.3. Ontario Regulation 332/12 Building Code,   O. Reg. 332/12: BUILDING CODE (ontario.ca) © Queen’s Printer […]
Read more

Entrance of cables into boxes, cabinets, and fittings

Entrance of cables into boxes, cabinets, and fittings 1) Where cables pass through the walls of boxes, cabinets, or fittings, provision shall be made to a) protect the insulation on the conductors from damage;b) protect terminal connections from external strain;c) provide electrical continuity between a metal box, cabinet, or fitting and conduit, armour, or metal […]
Read more

Fastening of Wood Furring

 Fastening of Wood Furring (1)  Furring shall be fastened to the framing or to wood blocks with not less than 51 mm nails. Article 9.29.3.2. Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only. Note : The term furring is used to describe the use of wooden strips or beams to […]
Read more