Installation of insulated conductors and cables

Installation of insulated conductors and cables (see Appendix B) 1) Insulated conductors and cables shall not be handled or installed when the ambient temperature is sufficiently low as to be liable to cause damage to the insulation. 2) Such insulated conductors and cables shall not be installed so as to permit flexing or movement of […]
Read more

Light switch with multiple lights wiring diagram

Light switch with multiple lights wiring diagram Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com Note : Rule 4-022, Installation of identified conductor, to install the identified conductor at each control location of permanently installed luminaire that also includes manual control devices […]
Read more

Light switches with multiple circuits

Light switches with multiple circuits Oncodes.ca publishes this information for educational purposes only. Please consult your electrician prior to any work and/or have an inspection performed. buildmyowncabin.com
Read more

Lighting equipment in damp locations or near grounded metal

Lighting equipment in damp locations or near grounded metal 1) Where luminaires are installed in damp locations or within 2.5 m vertically or 1.5 m horizontally of laundry tubs, plumbing fixtures, steam pipes, or other grounded metal work or grounded surfaces, the luminaires shall be controlled by a wall switch, except as permitted in Subrule […]
Read more

Lighting Outlets in Houses and Dwelling Units

Lighting Outlets in Houses and Dwelling Units (1)  Except as provided in Sentence (2), a lighting outlet with fixture controlled by a wall switch shall be provided in kitchens, bedrooms, living rooms, utility rooms, laundry rooms, dining rooms, bathrooms, water closet rooms, vestibules and hallways in a house or an individual dwelling unit. (2)  Where a receptacle […]
Read more

Marking of equipment (see Appendix B)

Marking of equipment (see Appendix B) 1) Each piece of electrical equipment shall bear those of the following markings necessary to identify the equipment and ensure that it is suitable for the particular installation: a) the maker’s name, trademark, or other recognized symbol of identification;b) catalogue number or type;c) voltage;d) rated load amperes;e) watts, volt […]
Read more