Concrete Pipe and Fittings (1)  Concrete pipe shall conform to CSA-A257 Series, “Standards for Concrete Pipe and Manhole Sections”.     (2)  Joints with external elastomeric gaskets shall be made with corrosion resistant external band type flexible mechanical couplings that conform to CSA B602, “Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe”.     (3)  Concrete fittings […]

Conformance to Standard (1)  Non-potable water systems for re-use purposes shall be designed, constructed and installed to conform to good engineering practice appropriate to the circumstances such as described in,     (a)   the ASHRAE Handbooks,     (b)   ASPE Data Books, or     (c)   CAN/CSA-B128.1, “Design and Installation of Non-Potable Water Systems”. O. Reg. 332/12, Division B, Part 7; O. […]

Conformance to Standards Plumbing     (1)  Water closets and urinals shall conform to the requirements in Article 7.6.4.2.     (2)  Vitreous china fixtures shall conform to ASME A112.19.2 / CSA B45.1, “Ceramic Plumbing Fixtures”.     (3)  Enamelled cast iron fixtures shall conform to ASME A112.19.1 / CSA B45.2, “Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures”.     (4)  Porcelain […]

Connection of Floor Outlet Fixtures (1)  Every pedestal urinal, floor-mounted water closet or S-trap standard shall be connected to a fixture drain by a floor flange or other means of connection, except that a cast iron trap standard may be caulked to a cast iron pipe.     (2)  Except as provided in Sentence (3), every floor flange […]

Copper and Brass Pipe (1)  Copper pipe shall conform to ASTM B42, “Seamless Copper Pipe, Standard Sizes”. (2)  Brass pipe shall conform to ASTM B43, “Seamless Red Brass Pipe, Standard Sizes”. Article 7.2.7.1. Ontario Regulation 332/12 Building Code,   O. Reg. 332/12: BUILDING CODE (ontario.ca) © Queen’s Printer for Ontario, 2021.

Copper Joints Used Underground (1)  Except as provided in Sentence (2), joints in copper tubes installed underground shall be,     (a)   made with either flared or compression fittings, or     (b)   brazed using a brazing alloy within the American Welding Society’s AWS-BCuP range. (2)  Compression fittings shall not be used underground under a building. Article 7.3.3.12. Ontario […]

Copper Tube (1)  Types M and DWV copper tube shall not be bent. (2)  Bends in copper tubing of soft or bending temper shall be made with tools manufactured and sized for the purpose. Article 7.3.3.10. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only