Lighting and Ventilation Requirements

Lighting and Ventilation Requirements (1)  Plumbing fixtures shall not be installed in a room that is not lighted and ventilated in accordance with the appropriate requirements in Parts 3 and 9. Article 7.1.6.1 Ontario Regulation 332/12 Building Code,   Information published by oncodes.ca for educational purposes only.
Read more

Linings and Coatings of Domestic Water Tanks

Linings and Coatings of Domestic Water Tanks (1)  Linings and coatings of domestic water tanks that come into contact with potable water shall be certified to NSF/ANSI 61, “Drinking Water System Components – Health Effects”. Article 7.2.10.7. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca for educational purposes only
Read more

Location of Vent Pipes

Location of Vent Pipes (1)  Except as provided in Sentences (2) and (3), a vent pipe that protects a fixture trap shall be located so that,     (a)   the developed length of the trap arm is not less than twice the size of the fixture drain,     (b)   the total fall of the trap arm is […]
Read more

Mechanical Couplings

Mechanical Couplings (1)  Groove and shoulder type mechanical pipe couplings shall conform to CSA B242, “Groove and Shoulder Type Mechanical Pipe Couplings”.               (2)  Mechanical Couplings for DWV and Sewer Pipe shall be certified to CSA B602, “Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe”. Article 7.2.10.4. Ontario Regulation 332/12 Building Code, Information published by oncodes.ca […]
Read more